Precision turned parts,
engineered to seal, thread & hold.
MECHENGERS manufactures ball valve components, stud bolts and custom machined parts in mild steel and SS316, held to ±0.01 mm and 100% in-house inspected, from a single prototype to volume.
Verified & certified:
- SS316 / SS304Marine-grade steel
- Ø 65 mm boreFull-bore flow
- ±0.01 mmRoundness held
- ±0 mm
- Turning tolerance on critical Ø
- 0%
- Batches inspected in-house
- 0+
- Part families in production
- 0
- Quality & compliance credentials
A focused CNC turning shop that treats your part like our own
MECHENGERS is a proprietor-led precision machining business in Antaliya, Billimora. We specialise in CNC turning job work, ball valve components, stud bolts, shafts and bespoke turned parts, for customers who need dimensional accuracy they can rely on.
Small enough to be genuinely responsive, disciplined enough to hold tight tolerances batch after batch. Send a drawing or a sample and we’ll take it from raw bar to a finished, inspected part.
Corrosion-grade stainless for valves, marine & chemical service
Strength and value for structural, machinery & general parts
Three core product families, one precision standard
Every part is single-point or CNC turned in-house and inspected to drawing, whether it seals, threads or holds.
4 productsIndustrial Valve Components
SS316 ball valves, valve lids, spoon valves and couplings turned to tight roundness and surface finish for leak-free flow control in pumps, plumbing and process lines.
Explore range
3 productsStud Bolts & Fasteners
Fully-threaded studs and flange stud bolts in MS and SS316, with clean, gauge-checked threads for flanged joints, structural and high-integrity bolting.
Explore range5 productsPrecision Machined Components
Collars, rings, end caps, holders and drums, bespoke CNC turned components for pumps, elevators, cranes and general engineering, produced from your samples or drawings.
Explore rangePrecision you can hold in your hand
A selection of parts we produce day-to-day, each single-point or CNC turned and inspected to drawing before it ships.
65 Dia Ball Valve
A 65 mm bore stainless ball valve assembly, turned and polished for a positive, low-torque seal in water, slurry and light process duty.
View details41 Dia Ball Valve
A compact 41 mm SS316 ball valve, corrosion-resistant and precision-turned for instrumentation, dosing and small-bore process lines.
View details
65 Dia Valve Lid
The turned SS316 end cap / lid for 65 mm ball valves, faced flat and threaded true so the valve seals square every time.
View detailsFlange Stud Bolt
Double-end and continuous flange stud bolts in SS316, threaded full-length with gauge-checked threads for leak-tight flanged joints.
View details
Every part, always turning
Twelve part families in one rotating showcase, hover to pause, tap any part to explore it.
Tap any part for specifications and a quote
A machining partner built around precision and trust
Not just a parts list: a capability. Here is what makes us a dependable long-term manufacturing partner.
CNC Precision Turning
Single-point and CNC turning centres hold critical diameters to ±0.01 mm, batch after batch. It is the foundation of every part we ship.
MS & SS316 Material Expertise
Deep, day-to-day experience across mild steel, EN8/EN9 and stainless SS304/SS316, matched to the corrosion, strength and finish your part demands.
Custom Job Work
Bring a drawing, a sample or a worn part. We reverse-engineer, quote and produce it, from a single prototype to repeat production runs.
Threading & Thread Rolling
Cut and rolled threads in metric, BSW and UNC, gauge-checked GO/NO-GO for a free-running, load-bearing fit on studs and fasteners.
Polishing & Surface Finishing
Mirror polishing, lapping and deburring for sealing faces, valve balls and running surfaces where finish decides performance.
100% In-house Inspection
Every batch is measured against drawing, micrometers, bore gauges and thread gauges, before it leaves the floor. Reports on request.
Eight controlled stages, one accountable process
Every part follows the same disciplined route, so quality is built in, not inspected in at the end.
- 01
Raw Material
Verified MS, EN-series and SS316 bar stock, checked for grade and size before it hits the floor.
- 02
CNC Machining
Turning centres cut the part to drawing, diameters, bores and faces held in controlled setups.
- 03
Threading & Rolling
Threads cut or rolled to pitch, then gauge-checked for a true, free-running fit.
- 04
Heat Treatment
Hardening, tempering or stress-relief through trusted partners where the application demands it.
- 05
Surface Finishing
Polishing, lapping, deburring and plating for sealing, corrosion and cosmetic requirements.
- 06
Quality Inspection
Dimensional and thread inspection against drawing, 100% of batches, documented on request.
- 07
Packaging
Rust-preventive wrap and secure packing so parts arrive exactly as they left us.
- 08
Dispatch
Reliable despatch across India from our Billimora works, with documentation to match.
Trusted where reliability is non-negotiable
From pumps to cranes, our parts run in demanding environments across India, anywhere a component has to fit, seal or hold, batch after batch.
Pumps & Fluid Handling
Collars, couplings and valve components for pump builders and rebuilders.
Collars · Couplings · Valve parts
Plumbing & Water
Ball valves and fittings for water supply, distribution and treatment lines.
Ball valves · Fittings
Elevators & Lifts
Bucket holders and fasteners engineered for repeated, cyclic service.
Bucket holders · Studs
Cranes & Hoists
Crane-grade brake drums and machined parts for lifting and material handling.
Brake drums · Machined parts
Valve OEMs
Turned valve bodies, balls and lids supplied as matched components to spec.
Bodies · Balls · Lids
General Engineering
Custom turned parts and fasteners for fabricators and machine builders.
Studs · Rings · Custom parts
Credentials that de-risk your order
A registered, certified Indian manufacturer you can verify, not an anonymous listing.
Certified CNC Lathe Operator
Issued by CIPET, Billimora · Govt. of India
Founder Digant Patel is formally trained and CIPET-certified in CNC lathe operation. With us, precision is a qualification, not just a promise.
Udyam / MSME Registered
Issued by Ministry of MSME · Govt. of India
A registered micro-manufacturing enterprise (NIC 25, fabricated metal products): a verified, accountable Indian business.
GST Verified
Issued by Govt. of India
GST-registered in Gujarat (state code 24) for transparent, compliant B2B trade.
GST-registered in Gujarat · Founded 2022 · Proprietor Digant Patel
Buyers who value getting it right, first time
What the engineers, buyers and maintenance teams we work with tell us.
“The valve components come in consistently round and to size, we bolt them straight into our assemblies without rework. That reliability is why we keep coming back.”
“We sent a worn sample and a rough sketch. They reverse-engineered it, quoted quickly and delivered a batch that fit first time. Genuinely helpful to work with.”
“Threads run free end-to-end and lengths are consistent across the whole order. For flange bolting that consistency saves us real time on site.”
Representative feedback shown while we gather permissioned client testimonials.
Everything you need before you enquire
Can’t find your answer? Talk to us directly, we’re quick to respond and happy to advise on material, method and cost.
Do you manufacture custom parts from my drawing or sample?
Which materials do you work with?
What tolerances can you hold?
Is there a minimum order quantity?
How do I request a quote?
Can you supply valve parts as matched components to an OEM?
Have a drawing or a part to match?
Send us your specification, sample or worn part. We’ll reverse-engineer it, quote quickly and machine it to precision, from a single prototype to volume production.